Forklift Training Programs Fort Mcmurray

Forklift Training Programs Fort Mcmurray - If you are searching for a job as an operator of a forklift, our regulatory-compliant lift truck training programs provide exceptional instruction in numerous styles and types of forklifts, classes on pre-shift inspection, fuel kinds and dealing with fuels, and safe operation of a lift truck. Practical, hands-on training assists individuals participating in obtaining fundamental operational skills. Course content comprises existing rules governing the operation of forklifts. Our proven forklift programs are meant to provide training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Safely Handle Loads

When the forklift is in use, do not raise or lower the forks. Loads must not extend above the backrest. This is due to the risk of the load sliding back towards the operator. Inspect for overhead obstructions and ensure there is adequate clearance before lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

While the load is raised the lift truck would be less stable. Make sure that no pedestrians cross under the elevated fork. The operator should never leave the lift truck while the load is raised.

The forks should be level when handling pallets, and high enough to extend all the way into and underneath the load. The width of the forks should provide equal weight distribution.

Before loading or unloading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks could be installed in order to support a semi-trailer that is not coupled to a tractor. The entrance door height must clear the forklift height by a minimum of 5 cm. Mark edges of docks, rail cars or ramps and avoid them.

Do not stay in a forklift for a long time without proper ventilation. The interior of the truck should be well lighted and free of loose objects, obstructions and trash. Inspect for holes in the floor. The installation of material which are non-slip on the floor would help prevent slipping. Clear any obstructions from docks and dockplates and make sure surfaces are not wet or oily.

Lift trucks should not be utilized to push or tow other forklifts.

Click to Download the pdf